Cisco EA-Series - Troubleshooting; Your Router was Not Successfully Set up

9
Troubleshooting
Linksys EA-Series
9
This chapter can help you solve common setup issues and connect to the
Internet. You can find more help from our award-winning customer support at
linksys.com/support.
Your router was not successfully set up
If Cisco Connect Cloud did not complete the setup, you can try the
following:
• Press and hold the Reset button on your router with a paperclip or pin
for 5-15 seconds, then run the Setup program again on the router’s CD.
Your router’s appearance may vary
• Temporarily disable your computer’s firewall (see the security software’s
instructions for help), then run the Setup program again on the router’s
CD.
• If you have another computer, use that computer to run the Setup
program again on the router’s CD.
Troubleshooting