Cisco EA-Series - Page 127

12
Troubleshooting
Linksys EA-Series
To fix the problem on Mac computers:
1. In the menu bar across the top of the screen, click the AirPort icon. A list
of wireless networks appears. Cisco Connect has automatically assigned
your network a name.
In the example below, the computer was connected to another wireless
network named JimsRouter. The name of the Linksys E-Series network,
BronzeEagle in this example, is shown selected.
2. Click the wireless network name of your Linksys E-Series router
(BronzeEagle in the example).
3. Type your wireless network password (Security Key) into the Password
field, then click OK.