Cisco Firepower 4110 Hardware Installation Guide

Figure 15: SFP
Bail clasp2Dust plug1
Transmit optical bore4Receive optical bore3
For some earlier production Firepower 4100 chassis, you may experience difficulty using the GLC-TE SFP
on the management port or fixed ports. Contact Cisco TAC for support if you encounter problems with the
GLC-TE SFP.
Caution
The following table lists the Cisco supported transceivers.
Table 10: Supported Cisco SFP/SFP+ Transceivers
PIDOptics Type
1 Gb
GLC-SX-MMD1G-SX
GLC-LH-SMD1G-LH/LX
GLC-EX-SMD1G-EX
GLC-ZX-SMD1G-ZX
GLC-T1G 1000Base-T
GLC-TE1G 1000Base-T
10 Gb
SFP-10G-SR10G-SR
SFP-10G-SR-S10G-SR-S
SFP-10G-LR10G-LR
SFP-10G-LR-S10G-LR-S
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
25
Overview
Supported SFP/SFP+ and QSFP Transceivers

Cisco Firepower 4110 Specifications

General

Power Supply	Dual, hot-swappable
Form Factor	1RU
Firewall Throughput (Multiprotocol)	10 Gbps
Number of 10GE (SFP+) Interfaces	8
Number of 40GE (QSFP+) Interfaces	2
Redundant Power Supply	Yes
Memory	32 GB
Ports	8 x 10GE, 2 x 40GE
Concurrent Sessions	8 Million
Number of 10/100/1000 Interfaces	8
Maximum Connections	8 Million
Management Ports	1 x RJ45
Data Ports	8 x 10GE, 2 x 40GE
Processor	Intel Xeon E5-2600