Cisco Firepower 4110 - 2.1 Operational Environment Components

Figure 4: Compliance Label on the 4100 Chassis
Front Panel
The following figure shows the front panel of the Firepower 4100.
Figure 5: Firepower 4100 Front Panel
Gigabit Ethernet management port2RJ-45 console port1
Eight fixed SFP+ (1-Gb/10-Gb) ports (in network
module slot 1)
Ethernet 1/1 through 1/8 labeled top to bottom,
left to right
4USB 2.0 Type A port3
SSD 2
Reserved for the optional MSP.
6SSD 1
Reserved for the primary SSD; slot 1 must always
be populated.
5
Locator LED8Power LED7
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
7
Overview
Front Panel