Cisco Firepower 4110 Hardware Installation Guide

4150414041204110Specification
——Operating
temperature:
• Long term: 0 to
45°C up to
6000 ft (1829
m)
• Long term: 0 to
35°C up to
6000-13,000 ft
(1829-3964 m)
• Short term: -5
to 55°C up to
6000 ft (1829
m)
Operating altitude:
0 to 13,000 ft (3962
m)
—NEBS operation
Product ID Numbers
The following table lists the PIDs associated with the Firepower 4100 series. All of the PIDs in the table are
field-replaceable. If you need to get a return material authorization (RMA) for any component, see Cisco
Returns Portal for more information.
See the show inventory command in the Cisco Firepower 4100/9300 FXOS Command Reference, in the
Cisco Firepower Threat Defense Command Reference, or in the Cisco ASA Series Command Reference for
the procedure to display a list of the PIDs for your Firepower 4100.
Note
Table 12: Firepower 4100 Series PIDs
DescriptionPID
Cisco Firepower 4110 AMP appliance, 1 RU, two
network module bays
FPR4110-AMP-K9
Cisco Firepower 4110 ASA appliance, 1 RU, two
network module bays
FPR4110-ASA-K9
Cisco Firepower 4110 NGFW appliance, 1 RU, two
network module bays
FPR4110-NGFW-K9
Cisco Firepower 4110 NGIPS appliance, 1 RU, two
network module bays
FPR4110-NGIPS-K9
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
29
Overview
Product ID Numbers

Cisco Firepower 4110 Specifications

General

Power Supply	Dual, hot-swappable
Form Factor	1RU
Firewall Throughput (Multiprotocol)	10 Gbps
Number of 10GE (SFP+) Interfaces	8
Number of 40GE (QSFP+) Interfaces	2
Redundant Power Supply	Yes
Memory	32 GB
Ports	8 x 10GE, 2 x 40GE
Concurrent Sessions	8 Million
Number of 10/100/1000 Interfaces	8
Maximum Connections	8 Million
Management Ports	1 x RJ45
Data Ports	8 x 10GE, 2 x 40GE
Processor	Intel Xeon E5-2600