Cisco Firepower 4110 - Page 80

Figure 55: Attach the Slide Rail Locking Bracket to the Side of the Chassis
Slide rail locking bracket2Chassis1
8-32 x 0.375-inch Phillips screws (three per side)3
Step 4 Attach a cable management bracket to each slide rail locking bracket using the four 8-32 x 0.375-inch Phillips screws
provided in the accessory kit.
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
76
Installation, Maintenance, and Upgrade
Install the FIPS Opacity Shield