Cisco Firepower 4110 User Manual

Cisco Preparative Procedures & Operational User Guide
© 2016 Cisco Systems, Inc. All rights reserved.
The selected image is uploaded to the FXOS chassis.
5) For certain software images you will be presented with an end-user license agreement after uploading
the image. Follow the system prompts to accept the end-user license agreement.
4.5.2.5 Update the Platform Bundle Image via CLI
1) Connect to the FXOS CLI.
2) Enter firmware mode:
Firepower-chassis# scope firmware
3) Enter auto-install mode:
Firepower-chassis /firmware # scope auto-install
4) Install the FXOS platform bundle:
Firepower-chassis /firmware/auto-install # install platform platform-vers
version_number
version_number is the version number of the FXOS platform bundle you are installing--for example,
1.1(2.51).
5) The system will first verify the software package that you want to install. It will inform you of any
incompatibility between currently installed applications and the specified FXOS platform software
package.
It will also warn you that any existing sessions will be terminated and that the system will need to be
rebooted as part of the upgrade.
Enter yes to confirm that you want to proceed with verification.
6) Enter yes to confirm that you want to proceed with installation, or enter no to cancel the installation.
The Firepower eXtensible Operating System unpacks the bundle and upgrades/reloads the
components.
7) To monitor the upgrade process:
a) Enter scope firmware.
b) Enter scope auto-install.
c) Enter show fsm status expand.
4.5.2.6 Update the Platform Bundle Image via GUI
1) Choose System > Updates.
The Available Updates page shows a list of the Firepower eXtensible Operating System platform
bundle images and application images that are available on the chassis.
2) Click Upgrade for the FXOS platform bundle to which you want to upgrade.
The system will first verify the software package that you want to install. It will inform you of any
incompatibility between currently installed applications and the specified FXOS platform software
package.

Cisco Firepower 4110 Specifications

General

Power Supply	Dual, hot-swappable
Form Factor	1RU
Firewall Throughput (Multiprotocol)	10 Gbps
Number of 10GE (SFP+) Interfaces	8
Number of 40GE (QSFP+) Interfaces	2
Redundant Power Supply	Yes
Memory	32 GB
Ports	8 x 10GE, 2 x 40GE
Concurrent Sessions	8 Million
Number of 10/100/1000 Interfaces	8
Maximum Connections	8 Million
Management Ports	1 x RJ45
Data Ports	8 x 10GE, 2 x 40GE
Processor	Intel Xeon E5-2600