Cisco Firepower 4110 User Manual

Cisco Preparative Procedures & Operational User Guide
© 2016 Cisco Systems, Inc. All rights reserved.
4.5.7.3 Delete a ASA Logical Device via CLI
1) Enter security services mode:
Firepower# scope ssa
2) View details for the logical devices on the chassis:
Firepower /ssa # show logical-device
3) For each logical device that you want to delete, enter the following command:
Firepower /ssa # delete logical-device device_name
4) View details for the applications installed on the logical devices:
Firepower /ssa # show app-instance
5) For each application that you want to delete, enter the following commands:
a) Firepower /ssa # scope slot slot_number
b) Firepower /ssa/slot # delete app-instance application_name
c) Firepower /ssa/slot # exit
6) Commit the configuration:
commit-buffer
4.5.7.4 Delete a ASA Logical Device via GUI
1) Choose Logical Devices to open the Logical Devices page.
The Logical Devices page shows a list of configured logical devices on the chassis. If no logical
devices have been configured, a message stating so is shown instead.
2) Click Delete for the logical device that you want to delete.
3) Click Yes to confirm that you want to delete the logical device.
4) Click Yes to confirm that you want to delete the application configuration.

Cisco Firepower 4110 Specifications

General

Power Supply	Dual, hot-swappable
Form Factor	1RU
Firewall Throughput (Multiprotocol)	10 Gbps
Number of 10GE (SFP+) Interfaces	8
Number of 40GE (QSFP+) Interfaces	2
Redundant Power Supply	Yes
Memory	32 GB
Ports	8 x 10GE, 2 x 40GE
Concurrent Sessions	8 Million
Number of 10/100/1000 Interfaces	8
Maximum Connections	8 Million
Management Ports	1 x RJ45
Data Ports	8 x 10GE, 2 x 40GE
Processor	Intel Xeon E5-2600