Cisco Firepower 4110 User Manual

Cisco Preparative Procedures & Operational User Guide
© 2016 Cisco Systems, Inc. All rights reserved.
1.2 References
TOE (Target of Evaluation) References
Table 1: TOE Series and Models
TOE Configuration
Hardware Configurations
Software Version
FP 4110
FP 4120
FP 4140
FP 4150
The Firepower 4100 chassis contains the
following components:
 Network module 1 with eight fixed
SFP+ ports (1G and 10G
connectivity), the management
port, RJ-45 console port, Type A
USB port, PID and S/N card,
locator indicator, and power switch
 Two network modules slots
(network module 2 and network
module 3)
 Two (1+1) redundant power supply
module slots
 Six fan module slots
 Two SSD bays
FXOS release 2.0.1 and ASA
release 9.6.2
FP 9300
The Firepower 9300 chassis contains the
following components:
 Firepower 9300 Supervisor—
Chassis supervisor module
◦ Management port
◦ RJ-45 console port
◦ Type A USB port
◦ Eight ports for 1 or 10 Gigabit
Ethernet SFPs (fiber and copper)
 Firepower 9300 Security
Module—Up to three security
modules
◦ 800 GB of solid state storage per
security blade (2 x 800 GB solid state
drives running RAID1)
 Firepower Network Module—Two
single-wide network modules or
one double-wide network module
 Two power supply modules (AC or
DC)
 Four fan modules
FXOS release 2.0.1 and ASA
release 9.6.2

Cisco Firepower 4110 Specifications

General

Power Supply	Dual, hot-swappable
Form Factor	1RU
Firewall Throughput (Multiprotocol)	10 Gbps
Number of 10GE (SFP+) Interfaces	8
Number of 40GE (QSFP+) Interfaces	2
Redundant Power Supply	Yes
Memory	32 GB
Ports	8 x 10GE, 2 x 40GE
Concurrent Sessions	8 Million
Number of 10/100/1000 Interfaces	8
Maximum Connections	8 Million
Management Ports	1 x RJ45
Data Ports	8 x 10GE, 2 x 40GE
Processor	Intel Xeon E5-2600