Cisco IOS XR

Implementing Keychain Management on Cisco IOS XR Software
How to Implement Keychain Management
SC-81
Cisco IOS XR System Security Configuration Guide
What to Do Next
After configuring a key identifier for the keychain, see the Configuring the Text for the Key String
section.
Configuring the Text for the Key String
This task configures the text for the key string.
SUMMARY STEPS
1. configure
2. key chain key-chain-name
3. key key-id
4. key-string [clear | password] key-string-text
5. end
or
commit
DETAILED STEPS
Command or Action Purpose
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Enters global configuration mode.
Step 2
key chain key-chain-name
Example:
RP/0/RP0/CPU0:router(config)# key chain
isis-keys
Creates a name for the keychain.
Step 3
key key-id
Example:
RP/0/RP0/CPU0:router(config-isis-keys)# key 8
RP/0/RP0/CPU0:router(config-isis-keys-0x8)#
Creates a key for the keychain.