Cisco IOS XR User Manual

Implementing Keychain Management on Cisco IOS XR Software
How to Implement Keychain Management
SC-83
Cisco IOS XR System Security Configuration Guide
DETAILED STEPS
Command or Action Purpose
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Enters global configuration mode.
Step 2
key chain key-chain-name
Example:
RP/0/RP0/CPU0:router(config)# key chain
isis-keys
Creates a a name for the keychain.
Step 3
key key-id
Example:
RP/0/RP0/CPU0:router(config-isis-keys)# key 8
RP/0/RP0/CPU0:router(config-isis-keys-0x8)#
Creates a key for the keychain.
Step 4
accept-lifetime start-time [duration
durationvalue | infinite | end-time ]
Example:
RP/0/RP0/CPU0:router(config-isis-keys)# key 8
RP/0/RP0/CPU0:router(config-isis-keys-0x8)#
accept-lifetime 1:00:00 october 24 2005
infinite
(Optional) Specifies the validity of the key lifetime in terms
of clock time.
Step 5
end
or
commit
Example:
RP/0/RP0/CPU0:router(config-isis-keys-0x8)# end
or
RP/0/RP0/CPU0:router(config-isis-keys-0x8)#
commit
Saves configuration changes.
• When you issue the end command, the system prompts
you to commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
– Entering yes saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to EXEC mode.
– Entering no exits the configuration session and
returns the router to EXEC mode without
committing the configuration changes.
– Entering cancel leaves the router in the current
configuration session without exiting or
committing the configuration changes.
• Use the commit command to save the configuration
changes to the running configuration file and remain
within the configuration session.

Cisco IOS XR Specifications

General

Operating System	Cisco IOS XR
Architecture	Microkernel
High Availability	Yes
Type	Network operating system
Developed by	Cisco Systems
License	Proprietary
Programming Language	C, C++
Kernel	QNX
Supported Platforms	Cisco ASR9000, NCS series
Security Features	Role-Based Access Control (RBAC), Secure Boot, Encryption
Management Interface	CLI, SNMP, NETCONF, RESTCONF
Release Date	2004
Target Devices	High-end core routers, service provider edge routers, data center interconnect (DCI) routers
Supported Hardware	Cisco routers and switches
Networking Protocols	BGP, OSPF, IS-IS, MPLS
Virtualization Support	Virtualization-ready, supports network function virtualization (NFV) and containerization technologies.