Cisco IP Conference Phone 8832

Install the Wireless Microphone Charging Cradle
You use the charging cradle to charge the wireless microphone battery.
Procedure
Step 1 Plug the charging cradle power adapter into an electrical outlet.
Step 2 Plug one end of the USB-C cable to the charging cradle and the other end into the power adapter.
The following figure shows installation of a wireless microphone charging cradle.
Figure 4: Wireless Microphone Charging Cradle Installation
Related Topics
Wireless Expansion Microphone, on page 14
Charge a Wireless Microphone
Before you begin
Install the wireless microphone charging cradle. For more information, see Install the Wireless Microphone
Charging Cradle, on page 7.
Procedure
Step 1 Place the microphone in the charging cradle.
Cisco IP Conference Phone 8832 Multiplatform Phone User Guide
7
Your Phone
Install the Wireless Microphone Charging Cradle