Cisco IP Conference Phone 8832

View the Phone Status
Procedure
Step 1 Press Settings .
Step 2 Select Status > Phone Status > Phone Status.
You can view the following information:
• Elapsed time—Total time elapsed since the last reboot of the system
• Tx (Packets)—Transmitted packets from the phone.
• Rx (Packets)—Received packets from the phone.
View the Status Messages on the Phone
Procedure
Step 1 Press Settings .
Step 2 Select Status > Status messages.
You can view a log of the various phone statuses since provisioning was last done.
Status messages reflect UTC time and are not affected by the timezone settings on the phone.
Note
Step 3 Press Back.
View the Line Status
Procedure
Step 1 Press Settings.
Step 2 Select Status > Phone status > Line status.
You can view the status of each line on the phone.
Cisco IP Conference Phone 8832 Multiplatform Phone User Guide
18
Your Phone
View the Phone Status