EasyManuals Logo

Cisco IR829 Product Guide

Cisco IR829
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
2-13
Cisco IR800 Integrated Services Router Software Configuration Guide
Chapter 2 Product Overview
Software Overview
Note If that particular IOS image is not present, the device will drop in rommon-2 mode and you will
need to manually boot an IOS image from there.
Step 2 Copy your desired default config file to the startup-config.
Step 3 Reload the router. Do NOT enter Yes if prompted whether you want to save the running-config to
startup-config.
Note To simplify the boot process, the IR800 routers do not support the ROMMON configuration register and
the associated CLI commands. The IR800 either boots the pre-configured images, or stops at the
ROMMON prompt for user intervention. In the event of a boot failure, see Chapter 3, “IR800 Bootstrap
Sequence and Troubleshooting” for additional information.
An example of the log activity after a reboot follows:
IR800# show log
*Nov 30 19:31:04.925: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0,
changed state to down
*Nov 30 19:31:10.651: %PLATFORM-5-RESET_BUTTON: Reset Button pressed during boot up.
*Nov 30 19:31:11.527: %LINK-3-UPDOWN: Interface Async0, changed state to up
*Nov 30 19:31:11.595: %SYS-5-RESTART: System restarted --
Cisco IOS Software, ir800 Software (ir800-UNIVERSALK9-M), Version 15.6(1)T, RELEASE
SOFTWARE (fc1)
Software Overview
The IR800 series offers a rich IOS feature set. This section provides a brief overview of these features.
Note Features may be dependent of platform and releases
Feature Description
Cellular Connectivity
4G LTE, 3.7G, 3.5G, or 3G Cellular WAN link
External, dual 4G antennas with main and receive diversity for maximum signal
strength connectivity
Dual subscriber identity module (SIM) capability
Wi-Fi (829 only)
Dual radio 802.11n concurrent 2.4 GHz and 5.0 GHz with embedded 2X3 MIMO
Up to 300 Mbps data rate per radio
Cisco IOx Application Support Provides an open, extensible environment for hosting OS and applications at the
network edge; expansion module slot to enable additional future communication
technologies.

Other manuals for Cisco IR829

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco IR829 and is the answer not in the manual?

Cisco IR829 Specifications

General IconGeneral
Serial Interfaces1 x RS-232
USB Ports1 x USB 2.0
Wireless802.11a/b/g/n
Product TypeRouter
Form FactorRack-mountable
Connectivity TechnologyWired, Wireless
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
WAN Ports Qty2
LAN Ports Qty4
Cellular ProtocolLTE
Memory2 GB DDR3
WAN Interfaces2 x Gigabit Ethernet
LAN Interfaces4 x 10/100/1000 Ethernet
Operating Temperature-20 °C to 60 °C
Processor1.2 GHz

Related product manuals