Revised: August 18, 2017,
Cisco IW3702 Access Point Getting Started Guide
This guide documents the hardware features of the Cisco IW3702 access point. It describes the physical and performance characteristics
of each access point, and explains how to install and configure an access point.
This publication is for the network technicians who install and configure access points. You must be familiar with network structures,
terms, and concepts.
The Cisco IW3702 access point is referred to as access point in this document.
Organization
This guide includes the following sections:
DescriptionSection
Describes text conventions used in this document.Conventions, on page 2
Describes the major components and features of the access
point.
Overview, on page 3
Provides warnings, safety information, and installation
information you need to install your access point.
Installation, on page 14
Provides information about the antennas used by the access
point and the antenna configurations deployed.
Antennas and RF Accessories, on page 25
Describes the steps to configure the access point.Configuration, on page 48
Lists technical specifications for the access point.Technical Specifications, on page 63
Describes the port and connector pinouts for the access point.Ports and Connectors, on page 72
Conventions
This document uses the following conventions.
IndicationConvention
Commands and keywords and user-entered text appear in bold
font.
bold font
Document titles, new or emphasized terms, and arguments for
which you supply values are in italic font.
italic font
Elements in square brackets are optional.[ ]
2
To Next Page
Loading...
Need help?
General
