To Next PageTo Next Page
Need help?Do you have a question about the Cisco IW3702 and is the answer not in the manual?
General| Model | IW3702 |
|---|---|
| Category | Wireless Access Point |
| Wireless Standards | 802.11a/b/g/n/ac |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Ingress Protection | IP67 |
| Ethernet Ports | 2 x 10/100/1000BASE-T |
| Power Source | PoE (802.3af) |
| Humidity | 5% to 95% (non-condensing) |
| Security | 802.1X |
| Mounting | Pole, wall |
Outlines the structure of the guide.
Introduces the Cisco IW3702 access point and its features.
Identifies bottom panel components and explains LED status meanings.
Identifies and describes components on the top panel.
Covers warnings and initial setup steps before installation.
Lists the items included in the access point package.
Provides instructions for physical installation and grounding the unit.
Details the various antenna options available for the access point.
Lists required cables, adapters, and lightning arrestors.
Describes methods for configuring the AP (CLI/GUI).
Guides users on establishing a console connection for configuration.
Explains the process of priming the AP for deployment.
Specifies operating conditions like temperature, humidity, and shock resistance.
Details power requirements and supported adapters for the access point.
Pinout information for the M12 power connector.
Pinout details for PoE IN and OUT connectors.
Pinout details for the RJ45 console port.
Guide on accessing further resources and submitting a service request.
