Cisco IW3702 - Page 65

DescriptionPID
AC to DC power adapter, international version without AC
plug
AIR-PWRADPT3700IN=
6
5
Available in August 2017
6
Available in August 2017
Supported PoE Power Injectors
The following power injectors are supported for the Cisco IW3702 access point:
•
AIR-PWRINJ1500-2=: PoE+ power injector, for indoor environments
The power injector AIR-PWRINJ1500-2= is not IP rated for outdoors. Use it in an
indoor environment only or put it in an NEMA enclosure. For more information, see
Cisco Aironet Series Power Injector AIR-PWRINJ1500-2= Installation Instructions.
Note
•
AIR-PWRINJ-60RGD1=: PoE+ power injector, for outdoor environments, with North American plug
•
AIR-PWRINJ-60RGD2=: PoE+ power injector, for outdoor environments, international version without AC plug
The power injectors AIR-PWRINJ-60RGD1= and AIR-PWRINJ-60RGD2= are IP66
rated. It does not meet all industrial specifications as supported by the IW3702. For
more information, see Cisco Aironet Series Power Injectors AIR-PWRINJ-60RGD1=
and AIR-PWRINJ-60RGD2= Installation Instructions.
Note
The following table lists specifications for the available power inputs.
Table 23: Power Connections Specifications
Length
(Max)
8
Wire Thickness,
Min Rating
Operating
Temperature
Range
7
GE-POE-OUT
(10/100/1000)
GE-POE-OUT
(POE PSE)
WiFi
4 x 4
MIMO
Power INPUT
20'/6.1m16 AWG, 8 A-58 to 167°F
(-50 to 75°C)
YesYes, 802.3afYesDC Input at
+12V
30'/9.1m20 AWG, 4 A-58 to 167°F
(-50 to 75°C)
YesYes, 802.3afYesDC Input at
+24V
60'/18.3m20 AWG, 2 A-58 to 167°F
(-50 to 75°C)
YesYes, 802.3afYesDC Input at
+48V
100mCAT5e(24AWG),
0.6 A, shielded
-40 to 167°F
(-40 to 75°C)
YesNoYesPOE-IN, 802.3at
(POE+, 25W)
65