SGE2010/SGE2010P Administration Guide 17
System Configuration
Using the Console
Serial Port Configuration
Use the Serial Port Configuration screen to view or change the baud rate of the Ethernet switch.
To open this screen:
1. From the S
w
itch Main Menu, select 1. System Configuration Menu.
2. From the Sy
stem Configuration Menu, select 2. Management Settings.
3. From the Ma
nagement Settings Menu, choose 1. Serial Port Configuration.
To change the baud rate of the serial port:
1. Select Ed
i
t, and then make changes.
2. Press the Esc ke
y to move the cursor to the Action list.
3. Select Sav
e to save your changes.
4. When the Oper
ation complete message appears, press the Esc key to move the cursor to the
Action list.
Telnet Configuration
Use the Telnet Configuration screen to view or change the time-out settings.
To Next Page
Loading...
Need help?
General
