Cisco Linksys SGE2010P

SGE2010/SGE2010P Administration Guide 25
System Configuration
Using the Console
VLAN Management
The VLAN Management menu provides access to a screen where you can view or modify the
default VLAN ID.
1. Default VLAN Setup (see page 25)
0.Back (Select to return to the previous menu.)
To open this screen:
1. From the S
w
itch Main Menu, select 1. System Configuration.
2. From the Sy
stem Configuration Menu, select 5. Vlan Management.
Default VLAN Setup
You can use the Default VLAN Setup screen to view and change the VLAN ID.
To open this screen:
1. From the Sw
itch Main Menu, select 1. System Configuration.
2. From the Sy
stem Configuration Menu, select 5. Vlan Management.
3. From the VLAN
Management menu, press 1. Default VLAN Setup.