SGE2010/SGE2010P Administration Guide 16
System Configuration
Using the Console
To change the system contact, system name, and location:
1. Select Edit, and then make your changes. Press the Tab key to move the cursor from one
field to the next.
2. Press the Esc ke
y to return to the Action list.
3. Select Sav
e to save your changes.
4. When the Oper
ation complete message appears, press the Esc key to move the cursor to the
Action list.
Management Settings
The Management Settings screen provides access to screens where you can change the settings
for serial port, telnet, and secure telnet (SSH).
1. Serial Port Configuration (see page 17)
2. Telnet Configuration (see page 17)
3. SSH Configuration (see page 18)
0.Back (Select to return to the previous menu.)
To open this screen:
1. From the S
w
itch Main Menu, select 1. System Configuration Menu.
2. From the Sy
stem Configuration Menu, select 2. Management Settings.
To Next Page
Loading...
Need help?
General
