Cisco Linksys SGE2010P

SGE2010/SGE2010P Administration Guide 44
Port Status
Using the Console
Stack Configuration
You can use the Stack Configuration screen to specify the Stack ID for the Ethernet switch. By
default, ID numbers are automatically assigned to each device.
To open this screen:
1. From the S
w
itch Main Menu, select 1. System Configuration.
2. From the Sy
stem Configuration Menu, select 11. Stack Configuration.
Port Status
The Port Status menu provides access to screens where you can view the port status and the
PoE status for each port on the switch.
1. Port Status (see page 45)
2. PoE Status (see page 45)
0.Back (Select to return to the previous screen.)
To open this screen:
From the S
witch Main Menu, pr
ess 2. Port Status.