Cisco MDS 9000 Series - HVACHVDC Power Cord; Fibre Cable Specifications

IllustrationLengthPlug TypeDescription
9.8 ft (3.0 m)IEC C14 (250 VAC 10
A)
CAB-C13-C14-3M
HVAC/HVDC Power Cord
Table 15: Power Cable Specifications for HVAC/HVDC Power Supplies
DescriptionPower CordPower Type
6.6 feet (2.0 m) cable with Saf-D-Grid and C14 connector
(use for up to 240 V)
CAB-HVAC-C14-2MHVAC
The following figure shows the power cord used with the 1.20-KW HVAC/HVDC Power Supply Unit:
Fibre Cable Specifications
For information on the fibre cable specifications, see the Cisco MDS 9000 Family Pluggable Transceivers
Data Sheet.
Cisco MDS 9124V-K9 Switch Hardware Installation Guide
54
Cable and Port Specifications
HVAC/HVDC Power Cord