Send documentation comments to mdsfeedback-doc@cisco.com
22-60
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show fabric-binding
show fabric-binding
To display configured fabric binding information, use the show fabric-binding command in EXEC
mode.
show fabric-binding {database [active] [vsan vsan-id] | efmd statistics [vsan vsan-id] |
statistics [vsan vsan-id] | status [vsan vsan-id] | violations [last number]}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays configured fabric binding database information.
switch# show fabric-binding database
--------------------------------------------------
Vsan Logging-in Switch WWN Domain-id
--------------------------------------------------
1 21:00:05:30:23:11:11:11 0x66(102)
1 21:00:05:30:23:1a:11:03 0x19(25)
1 20:00:00:05:30:00:2a:1e 0xea(234)
4 21:00:05:30:23:11:11:11 0x66(102)
4 21:00:05:30:23:1a:11:03 0x19(25)
61 21:00:05:30:23:1a:11:03 0x19(25)
61 21:00:05:30:23:11:11:11 0x66(102)
[Total 7 entries]
database Displays configured database information.
active Displays the active database configuration information.
vsan vsan-id Specifies the FICON-enabled VSAN ID. The range is 1 to 4093.
efmd statistics Displays Exchange Fabric Membership Data (EFMD) statistics.
statistics Displays fabric binding statistics.
status Displays fabric binding status.
violations Displays violations in the fabric binding configuration.
last number Specifies recent violations. The range is 1 to 100.
Release Modification
1.3(1) This command was introduced.
To Next Page
Loading...
Need help?
General