Send documentation comments to mdsfeedback-doc@cisco.com
22-164
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show ipv6 traffic
show ipv6 traffic
To display IPv6 protocol statistics for the system, use the show ipv6 traffic command.
show ipv6 traffic [interface {gigabitethernet slot/port | mgmt 0 | port-channel number | vsan
vsan-id}]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
interface Displays the IP interface status and configuration.
gigabitethernet
slot/port
Displays a Gigabit Ethernet interface slot and port number.
mgmt 0 Displays the management interface.
port-channel number Dispalsy the PortChannel interface. The range is 1 to 256.
vsan vsan-id Displays a IPFC VSAN interface and specifies the VSAN ID. The range is
1 to 4093.
Release Modification
3.1(0) This command was introduced.
To Next Page
Loading...
Need help?
General