Send documentation comments to mdsfeedback-doc@cisco.com
4-30
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear cores
clear cores
To clear all core dumps for the switch, use the clear cores command in EXEC mode.
clear cores
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines The system software keeps the last few cores per service and per slot and clears all other cores present
on the active supervisor module.
Examples The following example shows how to clear all core dumps for the switch.
switch# clear cores
Related Commands
Release Modification
1.0(2) This command was introduced.
Command Description
show cores Displays core dumps that have been made.
To Next Page
Loading...
Need help?
General