3-6
Cisco ME 1200 Series Carrier Ethernet Access Devices Hardware Installation Guide
OL-31962-04
Chapter 3 AC and DC Input Power
Grounding the Switch
Figure 3-7 Crimping the Ground Lug
Step 5
Attach the dual-hole lug and the wire assembly to the chassis ground connection with the supplied screws (see
Figure 3-8).
Figure 3-8 Attaching the Ground Lug and Wire Assembly
Step 6
Use a ratcheting torque Phillips-head screwdriver to torque the ground-lug screws to 32 in-lb.
Step 7 Connect the other end of the grounding wire to an appropriate grounding point at your site or to the rack.
To Next Page
Loading...
