Cisco MX Series User Manual

Cisco Unified Communications Manager
Contact your CUCM administrator to get the information
needed.
Enter IP address or DNS name in the Host server address field,
and select OK to confirm the change*.
You can find more details about setting up CUCM provisioning
in the Administering CE endpoints on CUCM guide.
* The DHCP server can be set up to provide the Host server address
automatically (DHCP Option 150). Any input set up here overrides the
setting provided by DHCP.
CUCM via Expressway
Contact your CUCM administrator to get the information
needed.
Enter Username, Passphrase and Domain in the corresponding
input fields. Always select OK to confirm the changes. Select
Apply to save.
In some cases, you must manually enter the Expressway
address. Select Manually override Expressway address, and
enter the address you have received upon ordering in the Host
Server Address field.
VCS
Contact your VCS provider to get the information needed.
1. Enter IP address or DNS name of the Cisco VCS in the
Host server address and select OK to confirm the change.
2. Enter the Username, and Passphrase, if required, for
authenticating the video system with the provisioning
server. Select OK to confirm the change
3. Enter SIP Domain and select OK to confirm the change.
4. Select Apply to save the changes.
Have a look at the Cisco VCS provisioning appendix for more
information on VCS provisioning.
To check that the SX10 is registered: Navigate to the
gearwheel icon in the upper left corner of the home
screen and select System Information.
Cisco TelePresence Video Systems
D15318.02 Video Systems Getting Started Guide CE8.1, APRIL 2016. Copyright © 2016 Cisco Systems, Inc. All rights reserved. 23
Getting Started Guide
Introduction
User interfaces
Web interface
On-screen setup assistant
Appendices

Touch
On-screen setup assistant

Cisco MX Series Specifications

General

Brand	Cisco
Model	MX Series
Category	Conference System
Language	English