Cisco MX Series User Manual

Touch controller
Wake up the system
If there is no menu displayed on the Touch controller, tap the
display to wake up the system.
If the system doesn't wake up:
• Make sure the Touch controller is connected to the main
unit.
• Make sure the main unit is connected to power and
switched on.
If the system has just been switched on, wait a few minutes
to allow the system to start up.
For further instructions, read the installation guide and the
administration for your product.
For an overview of Touch controller features and use, see
How to use the Touch controller.
Cisco TelePresence Video Systems
D15318.02 Video Systems Getting Started Guide CE8.1, APRIL 2016. Copyright © 2016 Cisco Systems, Inc. All rights reserved. 25
Getting Started Guide
Introduction
User interfaces
Web interface
On-screen setup assistant
Appendices

Touch
Touch

Cisco MX Series Specifications

General

Brand	Cisco
Model	MX Series
Category	Conference System
Language	English