Provisioning set-up
(When using a provisioning system)
Start the Provisioning Wizard
Tap the user name in the upper left corner, and tap Settings.
Tap Administrator > Provisioning and then Start.
NOTE: When you start up a system with a Touch controller
for the first time, the Provisioning Wizard starts automatically.
Choose provisioning infrastructure
Choose one of the following supported provisioning systems:
• Cisco UCM (Unified Communications Manager)
• Cisco UCM via Expressway
• Cisco VCS (Video Communication Server)
Tap Register to proceed.
Enter required parameters
Enter the parameters required for the chosen provisioning
infrastructure. Then tap Register to complete the procedure.
Cisco UCM
Contact your UCM provider to get the IP address or DNS
name of the Cisco UCM (External Manager).*
You can find more details about setting up Cisco UCM provi-
sioning in the Administering CE endpoints on CUCM guide
Cisco UCM via Expressway
Upon ordering this service, you have received a Username,
Domain and Passphrase. Enter those in the corresponding
input fields.
In some cases, you must manually enter the Expressway
address. Select Manually override Expressway address, and
enter the address you have received upon ordering in the
External Manager field.
Cisco VCS
Contact your VCS provider to get the IP address or DNS
name of the Cisco VCS (External Manager) and the SIP
Domain.*
If required, set the Username and Passphrase for authenti-
cating the video system with the provisioning server.
Have a look at the Cisco VCS provisioning appendix for
more information on VCS provisioning.
* The DHCP server can be set up to provide the External Manager address
automatically (DHCP Option 150). Any input set up here overrides the
setting provided by DHCP.
Cisco TelePresence Video Systems
D15318.02 Video Systems Getting Started Guide CE8.1, APRIL 2016. Copyright © 2016 Cisco Systems, Inc. All rights reserved. 26
Getting Started Guide
On-screen setup assistant
To Next Page
Loading...
Need help?
General
