Cisco NCS 4200 Series - Prerequisites for Ethernet Data Plane Loopback; Restrictions for Ethernet Data Plane Loopback

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
SONET/SDH Path Tables
INTERVAL CV ES SES UAS
16:11-16:11 0 0 0 0
STS-1 1 - 3 mode sts-3c
cep is configured: TRUE cem_id :0
Path 2:
configured as member of a concatenated interface
Path 3:
configured as member of a concatenated interface
Configuring VCoP Smart SFP on OC-12
Enabling VCoP Smart SFP on OC-12
You can enable VCoP smart SFP for STS-1 and STS-12C channels on OC-12.
enable
configure terminal
platform smart-sfp interface GigabitEthernet 0/0/8 type OC12
exit
Configuring Framing for CEM Circuits for STS-1 on OC-12
enable
configure terminal
controller SONET 0/0/8
framing sonet
sts-1 1
mode unframed
cem-group 20 cep
sts-1 2
mode unframed
cem-group21 cep
sts-1 3
mode unframed
cem-group 22 cep
sts-1 4
mode unframed
sts-1 5
mode unframed
sts-1 6
mode unframed
sts-1 7
mode unframed
sts-1 8
mode unframed
sts-1 9
mode unframed
sts-1 10
mode unframed
sts-1 11
mode unframed
sts-1 12
mode unframed
exit
Configuring CEM Circuits on VCoP for STS-12C on OC-12
enable
configure terminal
controller SONET 0/0/8
9