Cisco Network Device Cisco 2800 User Manual

10
Troubleshooting Cisco 2800 Series Routers
OL-5789-01
System Messages
AUX/
PWR
Amber Message:
%ENVMON-5-RPS_STATUS: RPS standby/faulty
Explanation:
Redundant power supply has failed or has gone into standby mode.
Recommended action:
Check the redundant power supply. If faulty, disconnect it from the router and contact your
Cisco technical support representative.
Note The Cisco 2801 does not support RPS. This message is not applicable to the Cisco 2801.
AUX/
PWR
Green Message:
%ENVMON-5-RPS_STATUS: RPS not available
Explanation:
Redundant power supply is connected to the router, but is not available to back up the internal
power supply.
Recommended action:
Message is informational only.
Note The Cisco 2801 does not support RPS. This message is not applicable to the Cisco 2801.
AUX/
PWR
Green Message:
%ENVMON-5-RPS_STATUS: RPS in use
Explanation:
The router is receiving power from the redundant power supply.
Recommended action:
Message is informational only.
Note The Cisco 2801 does not support RPS. This message is not applicable to the Cisco 2801.
AUX/
PWR
Green Message:
%ENVMON-5-RPS_STATUS: RPS ready/available
Explanation:
Redundant power supply is connected to the router and is powered up, but the router is not
receiving power from the redundant power supply.
Recommended action:
Message is informational only.
Note The Cisco 2801 does not support RPS. This message is not applicable to the Cisco 2801.
Table 3 System Error and Recovery Messages (continued)
LED Type LED Color Message, Meaning, and Recommended Action

Cisco Network Device Cisco 2800 Specifications

General

Brand	Cisco
Model	Network Device Cisco 2800
Category	Network Router
Language	English