Corporate Headquarters:
Copyright © 2004 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Installing Interface Cards in Cisco 2800 Series
Routers
This chapter contains information on installing interface cards, interface card slot dividers, and blank
panels in Cisco 2800 series integrated services routers.
This chapter contains the following sections:
• Viewing the Cisco Interface Card Installation Guide, page 1
• Installing and Removing Slot Dividers, page 1
• Installing Blank Panels over Empty Chassis Slots, page 6
• Related Product Documentation, page 7
Viewing the Cisco Interface Card Installation Guide
The Cisco Interface Card Installation Guide contains the procedures for installing the various types of
interface cards in external chassis slots. Interface cards include the following types:
• Voice interface cards (VIC)
• Voice-WAN interface cards (VWIC)
• WAN interface cards (WIC)
• High-speed WAN interface cards, single-wide (HWIC)
• High-speed WAN interface cards, double-wide (HWIC-D)
You can view the Cisco Interface Cards Installation Guide online on Cisco.com.
Installing and Removing Slot Dividers
In HWIC slots, you can install a slot divider to convert a double-wide HWIC slot into two single-width
slots.
To Next Page
Loading...
Need help?
General
