Cisco RV 120W User Manual

10 Cisco Small Business RV 120W Quick Start Guide
Configuring Security
STEP 1 Enter a new Cisco RV 120W administration password and click
Next. For security reasons, you should not use the default
password. Follow these password guidelines:
• Passwords should not contain dictionary words from any
language or the default password.
• Passwords should contain a mix of letters (both upper- and
lowercase), numbers, and symbols.
• Passwords must be at least 8 but no more than 30 characters.
• Password security ratings are shown to the right of the
password you enter, and are rated from weak to secure. Cisco
recommends using a password rated as secure.
STEP 2 Enter a name (SSID) for your wireless network and click Next. You
should change the default SSID to a unique name. The SSID is
case-sensitive.
NOTE For added security, disable broadcasting of the SSID. You can
disable SSID broadcast using the configuration utility; see Using
the Configuration Utility, page 12.
STEP 3 Select the type of security to use:
Best Security (WPA2)
Strong wireless security that uses a password (security key) to
protect your network. Recommended for most networks. The
devices you connect to your wireless network must support
WPA2; see the support information for your device if you have
questions.
a. Enter a security key (must be at least 8 and no more than 63
characters) or use the randomly-generated one provided by
the Cisco RV 120W. Keys should contain a mix of letters (both
upper- and lowercase), numbers, and symbols. Security key
ratings are shown to the right of the key and are rated from
weak to secure. Cisco recommends using a key rated as
secure.
b. Click Next.

Cisco RV 120W Specifications

General

Brand	Cisco
Model	RV 120W
Category	Network Router
Language	English