Cisco RV340 Series

Using VPN Setup Wizard
4
The VPN allows a remote host to act as if they were located on the same local net-
work. The router supports 50 tunnels. The VPN Setup Wizard guides in configuring
a secure connection for site-to-site IPSec tunnel. This simplifies the configuration
by avoiding complex and optional parameters, so any user can set up the IPSec
tunnel in a fast and efficient manner.
1
1
From the Getting Started
page, Click [VPN Setup-
Wizard].
4
7
5
3
6
2
2
Enter a connection name in
the [Give this connection a
name] field.
3
Select an interface from
the drop-down list.
4
Click [Next].
5
Select the [Remote Con-
nection Type] from the
drop-down list.
6
If you select [IP Address],
enter the IP Address, or if
you select a [FQDN], enter
the name.
7
Click [Next].
12
8
Select the [Local IP] from
the drop-down list.
9
If you select [IP Address],
enter the IP address, or if
you select [Subnet], enter
the IP address and subnet
mask.
10
Select the [Remote IP]
from the drop-down list.
11
If you select [IP Address],
enter the IP address, or if
you select [Subnet], enter
the IP address and subnet
mask.
12
Click [Next].
9
11
8
10
Cisco RV340 Series Security Router Easy Setup Guide
4
Using VPN Setup Wizard