Cisco Service Manual Service Manual

D14908.02 SX20 Administrator Guide TC6.0, JANUARY 2013. www.cisco.com — Copyright © 2012-2013 Cisco Systems, Inc. All rights reserved.
18
Cisco TelePresence SX20 Quick Set Administrator Guide
Navigate to: Call Control > Call Control
Controlling the camera
You can control the camera using the Call Control page.
Click the Camera Control button to open the window where
you can pan, tilt and zoom the camera, and apply camera
presets.
Camera presets
If a camera preset is
defined it is listed here.
Apply the preset by clicking
its name.
Pan and tilt
Use the left and right
arrows to pan the camera,
and the up and down
arrows to tilt it.
Zoom
Use + and - to zoom in and
out.
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Web interface

Cisco Service Manual Specifications

General

Brand	Cisco
Model	Service Manual
Category	Conference System
Language	English