Cisco Service Manual Service Manual

D14908.02 SX20 Administrator Guide TC6.0, JANUARY 2013. www.cisco.com — Copyright © 2012-2013 Cisco Systems, Inc. All rights reserved.
44
Cisco TelePresence SX20 Quick Set Administrator Guide
Factory reset
When performing a factory reset the call logs will be deleted
and all system parameters will be reset to default values. All
files that have been uploaded to the system will be deleted.
Release keys and option keys will be preserved.
It is not possible to undo a factory reset.
There are more information about performing a factory reset
in the ► Factory resetting appendix.
Perform a factory reset
1. Read the provided information
carefully before you restore the
factory settings by clicking Perform
a factory reset.
2. Click Reset to confirm your choice,
or Cancel if you have changed your
mind.
Wait while the system resets. The
system will restart automatically
when finished.
Navigate to: Maintenance > Factory Reset
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Web interface

Cisco Service Manual Specifications

General

Brand	Cisco
Model	Service Manual
Category	Conference System
Language	English