Need help?Do you have a question about the Cisco SG250-10P and is the answer not in the manual?
General| Model | SG250-10P |
|---|---|
| Type | Managed |
| Ports | 10 |
| PoE Ports | 8 |
| PoE Power Budget | 62W |
| Layer | Layer 2 |
| Switching Capacity | 20 Gbps |
| Forwarding Rate | 14.88 Mpps |
| MAC Address Table | 8K |
| Jumbo Frame Support | Up to 9216 bytes |
| Power Supply | Internal |
| Operating Temperature | 0° to 40°C (32° to 104°F) |
| Storage Temperature | -20° to 70°C (-4° to 158°F) |
| Operating Humidity | 10% to 90% (non-condensing) |
| Storage Humidity | 5% to 95% (non-condensing) |
Lists items included with the Cisco 250 Series Smart Switch package.
Details prerequisites and tools needed before starting the installation process.
Guidance on optimal switch placement to prevent overheating and ensure stability.
Instructions for mounting the switch in a standard 19-inch rack unit.
Step-by-step instructions for mounting the switch on a wall.
Discusses requirements and considerations for switches with Power over Ethernet (PoE) capabilities.
Guides users on accessing and configuring the switch via its web interface.
Provides steps to diagnose network connectivity problems using the ping command.
Lists common issues like power, connection, IP addressing, and access time with solutions.
Details the various physical ports like USB, RJ-45, and SFP on the switches.
Explains the function of System, LINK/ACT, PoE, 100M, Gigabit, and SFP LEDs for status.
Covers the reset button functionality and the location of the power port.
Instructions on how to reboot or perform a factory reset using the reset button.
Lists Cisco support channels, firmware downloads, and contact information.
Provides links to further documentation, compliance, and warranty details.
To Next Page
