Cisco SG550XG-8F8T User Manual

Security: 802.1X Authentication
Overview
319 Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
17
Common Tasks
Workflow 1: To enable 802.1x authentication on a port:
STEP 1 Click Security > 802.1X/MAC/Web Authentication > Properties.
STEP 2 Enable Port-based Authentication.
STEP 3 Select the Authentication Method.
STEP 4 Click Apply, and the Running Configuration file is updated.
STEP 5 Click Security > 802.1X/MAC/Web Authentication> Host and Session.
STEP 6 Select the required port and click Edit.
STEP 7 Set the Host Authentication mode.
STEP 8 Click Apply, and the Running Configuration file is updated.
STEP 9 Click Security > 802.1X/MAC/Web Authentication > Port Authentication.
STEP 10 Select a port, and click Edit.
STEP 11 Set the Administrative Port Control field to Auto.
STEP 12 Define the authentication methods.
STEP 13 Click Apply, and the Running Configuration file is updated.
Full multi-
sessions
Frames are
re-mapped to
the guest
VLAN
Frames
are re-
mapped to
the guest
VLAN
unless
they
belongs to
the
unauthent
icated
VLANs
Frames are
dropped
Frames
are
dropped
unless
they
belongs
to the
unauthent
icated
VLANs
Frames are
re-mapped to
the RADIUS
assigned
VLAN
Frames
are re-
mapped
to the
Radius
VLAN
unless
they
belongs
to the
unauthent
icated
VLANs
Frames are
bridged based
on the static
VLAN
configuration
Frames
are
bridged
based on
the static
VLAN
configurat
ion
Unauthenticated Traffic Authenticated Traffic
With Guest VLAN Without Guest VLAN With Radius VLAN Without Radius VLAN
Untagged Tagged Untagged Tagged Untagged Tagged Untagged Tagged

Cisco SG550XG-8F8T Specifications

General

Brand	Cisco
Model	SG550XG-8F8T
Category	Switch
Language	English