Security: 802.1X Authentication
Web Authentication Customization
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x 328
17
You can add up to 4 languages.
NOTE Up to 5 HTTP users and one HTTPS user can request web-based authentication at the same
time. When these users are authenticated, more users can request authentication.
To add a language for web-based authentication:
STEP 1 Click Security > 802.1X/MAC/Web Authentication > Web Authentication
Customization.
STEP 2 Click Add.
STEP 3 Select a language from the Language drop-down list.
STEP 4 Select Set as Default Display Language if this language is the default language. the default
language pages are displayed if the end user does not select a language.
STEP 5 Click Apply and the settings are saved to the Running Configuration file.
To customize the web-authentication pages:
STEP 1 Click Security > 802.1X/MAC/Web Authentication > Web Authentication
Customization.
This page displays the languages that can be customized.
STEP 2 Click Edit Login Page.
Figure 4 The following page is displayed:
STEP 3 Click Edit labeled 1. The following fields are displayed: