Cisco SGE2000 Administration Guide

Chapter
4
39
Chapter 4: Console Configuration
Configuring the Switch through the Console or Telnet Interface
Linksys One Ready Communications Solution
SSH Configuration
Use the SSH Configuration screen to configure and display SSH settings.
SSH Server Configuration: Use the SSH Server Configuration screen to enable or disable
the SSH server, and to configure the port over which the SSH session is enabled.
To change SSH Server settings:
a. Select Edit to make changes.
b. When your changes are complete, press the Esc key to return to the Action menu.
c. Select Save to save your changes.
SSH Status: Use the SSH Status screen to view information about SSH sessions.
SSH Crypto Key Generation: Use the SSH Crypto Key Generation screen to generate an
SSH RSA or DSA key.
To change SSH Crypto Key Generation settings:
a. Select Edit to make changes.
b. When your changes are complete, press the Esc key to return to the Action menu.
c. Select Save to save your changes.

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg