Cisco SGE2000 Administration Guide

42
Chapter 4: Console Configuration
Configuring the Switch through the Console or Telnet Interface
Linksys One Ready Communications Solution
Chapter
4
To change SSL Certificate Generation settings:
a. Select Edit to make changes.
b. When your changes are complete, press the Esc key to return to the Action menu.
c. Select Save to save your changes.
Show Certificate
Use the Show Certificate screen to display the internal certificate.
Disable Active Management Access Profile
Disables the currently active management access profile.
To disable the currently active management access profile:
a. Type Y to verify that you want to disable the currently active management access
profile.
Country Name Specifies the country name. (Range: 2 to 2)
Validity Term Specifies number of days certification is valid.
(Range: 30 to 3650)

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg