Cisco SPA 525G2 Administration Guide

Cisco SPA IP Phone Field Reference
System Tab
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 215
B
Optional Network Configuration
Parameter Description
Host Name The host name of the IP phone.
Domain The network domain of the IP phone.
Primary DNS DNS server used by IP phone in addition to DHCP
supplied DNS servers if DHCP is enabled; when DHCP
is disabled, this is the primary DNS server.
Defaults to 0.0.0.0.
Secondary DNS DNS server used by IP phone in addition to DHCP
supplied DNS servers if DHCP is enabled; when DHCP
is disabled, this is the secondary DNS server.
Defaults to 0.0.0.0.
DNS Server Order Specifies the method for selecting the DNS server. The
options are Manual, Manual/DHCP, and DHCP/Manual.
DNS Query Mode Do parallel or sequential DNS Query. With parallel DNS
query mode, the IP phone sends the same request to
all the DNS servers at the same time when doing a
DNS lookup, the first incoming reply is accepted by the
IP phone.
Defaults to parallel.
Syslog Server Specify the syslog server name and port. This feature
specifies the server for logging IP phone system
information and critical events. If both Debug Server
and Syslog Server are specified, Syslog messages are
also logged to the Debug Server.
Debug Server The debug server name and port. This feature
specifies the server for logging IP phone debug
information. The level of detailed output depends on
the debug level parameter setting.
Debug Level The debug level from 0-3. The higher the level, the
more debug information is generated. Zero (0) means
no debug information is generated. To log SIP
messages, you must set the Debug Level to at least 2.
Defaults to 0.

Cisco SPA 525G2 Specifications

General

Brand	Cisco
Model	SPA 525G2
Category	IP Phone
Language	English