Installing Your Phone
Connecting the SPA932 Attendant Console to the SPA962
Cisco Small Business IP Phone SPA9XX User Guide 27
2
STEP 7 Locate the AUX port on the back of the SPA962. Connect the other end of the
auxiliary cable to this port.
STEP 8 Route the auxiliary cable inside the cable relief channel in the SPA932.
STEP 9 Attach the appropriate desktop stand to each unit. The SPA932 is powered via the
auxiliary cable with the SPA962. No additional power source is required.
Connecting an Additional SPA932
NOTE: A maximum of two SPA932 Attendant
Consoles can be connected to a SPA962.
To Next Page
Loading...
