Using Basic Phone Functions
Placing a Three-Way Conference Call
Cisco Small Business IP Phone SPA9XX User Guide 51
3
STEP 3 You or another person must then “unpark” the call.
To unpark a call, you can either use the Unpark button (if you know the park line
number), or view a list of parked calls and unpark it from the list.
To unpark if you know the park line number:
STEP 1 Press the Unpark button.
STEP 2 Enter the number identifier of the park line (for example, the number that was
entered in Step 2 of “parking a call.”)
STEP 3 Press Dial. The call is picked up on your phone.
To view a list of parked calls (and unpark from the list):
STEP 1 Press the Setup button.
STEP 2 Select Call Park Status.
STEP 3 Choose the parked call you want to retrieve and press Unpark.
Placing a Three-Way Conference Call
To initiate a conference call:
STEP 1 Press the Conf button during an active call. The first call is placed on hold, a
second line is opened., and you hear a dial tone.
STEP 2 Dial the second person’s telephone number.
STEP 3 Press the Conf button again. All three parties are connected in the conference call.
When you hang up, the other two parties are disconnected.
To Next Page
Loading...
