Using Basic Phone Functions
Picking Up a Call
Cisco Small Business IP Phone SPA9XX User Guide 50
3
Picking Up a Call
You can pick up a call that is ringing at another extension. Depending on the way
your phone network is configured, you can pick up a call ringing at any extension,
or you may have a group of phones configured where members of the group can
pick up a call ringing at any group member’s phone.
To pick up a call ringing at an extension in your group:
STEP 1 Press the GrPickup softkey. The phone displays any extensions in the group that
have ringing calls.
STEP 2 Choose the call you want to pick up and press Dial.
To pick up a call ringing at any extension:
STEP 1 Press the Pickup button.
STEP 2 Enter the extension number of the phone from which you are picking up the call
and press Dial.
STEP 3 Press Dial again.
Parking a Call
You can “park” a call on a designated line so that another person in your company
can pick up the call. The call is active until it is “unparked” or the caller hangs up.
To p a r k a c a l l :
STEP 1 While on an active call, press the Park button.
STEP 2 Enter a number to identify the park line and press Dial. The park line number does
not correspond with an actual phone extension number, and you can pick any
easily-remembered number. The call is then parked on that line, and the caller
hears “on hold” music or messages.
To Next Page
Loading...
