D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
34
Cisco TelePresence MX700 and MX800 Administrator Guide
User administration
You can manage your video conference system’s user
accounts from this page.
The default user account
The system comes with a default administrator user account
with full access rights. The user name is admin and no
password is set.
It is mandatory to set a password for the admin user.
Read more about passwords in the ► Setting passwords
chapter.
About user roles
A user account must hold one or a combination of several
user roles.
The following three user roles, with non-overlapping rights,
exist:
• ADMIN: A user holding this role can create new users and
change most settings. The user neither can upload audit
certificates nor change the security audit settings.
• USER: A user holding this role can make calls and search
the phone book. The user can modify a few settings, e.g.
adjusting the ringtone volume and setting the time and
date format.
• AUDIT: A user holding this role can change the security
audit configurations and upload audit certificates.
An administrator user account with full access rights,
like the default admin user, must possess all the three
roles.
Default user account
The system comes with
admin as the default user
account. This user has
full access rights.
Navigate to: Configuration > User Administration
(page 1 of 4)
To Next Page
Loading...
Need help?
General
