Cisco TelePresence MX200 G2 Administrator's Guide

D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
60
Cisco TelePresence MX700 and MX800 Administrator Guide
Audio settings
Audio Input HDMI [n] Mode
This setting applies to HDMI [2..3] for single camera systems, and to HDMI [3] for dual camera
systems.
Determine if the audio channels on the HDMI input shall be enabled. The HDMI input has two
audio channels.
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable audio on the HDMI input.
On: Enable audio on the HDMI input.
Example:
Audio Input HDMI 3 Mode: On
Audio Input HDMI [n] Level
This setting applies to HDMI [2..3] for single camera systems, and to HDMI [3] for dual camera
systems.
Define the audio level of the HDMI input connector, in steps of 1 dB.
See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete
overview of the menu values represented in dB.
Requires user role: ADMIN
Value space: <-24..0>
Range: Select a value from -24 to 0 dB.
Example:
Audio Input HDMI 3 Level: 0
Audio Input HDMI [n] VideoAssociation MuteOnInactiveVideo
This setting applies to HDMI [2..3] for single camera systems, and to HDMI [3] for dual camera
systems.
Enable association of a video source to an HDMI audio input.
Requires user role: ADMIN
Value space: <Off/On>
Off: No video source is associated.
On: A video source is associated, and the audio will be muted if the associated video source
is not displayed.
Example:
Audio Input HDMI 3 VideoAssociation MuteOnInactiveVideo: Off
Audio Input HDMI [n] VideoAssociation VideoInputSource
This setting applies to HDMI [2..3] for single camera systems, and to HDMI [3] for dual camera
systems.
Select the associated video input source.
Requires user role: ADMIN
Value space: <1/2/3/4>
Range: Select one of the video input sources.
Example:
Audio Input HDMI 3 VideoAssociation VideoInputSource: 1
Audio Input Line [1..4] Equalizer ID
Select the audio input line equalizer ID.
Requires user role: ADMIN
Value space: <1..8>
Range: Select EqualizerID 1 to 8.
Example:
Audio Input Line 1 Equalizer ID: 1
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
System settings

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30