Cisco Telepresence MX200 Administrator's Guide

D14850.12 MX200 and MX300 Administrator Guide TC7.3, JULY 2015. www.cisco.com — Copyright © 2011–2015 Cisco Systems, Inc. All rights reserved.
10
Cisco TelePresence MX200 and MX300 Administrator Guide
1. Connect to the video system
2. Sign in
Enter the user name and password for your
video system and click Sign In.
The system is delivered with a default
user named admin with no password.
Leave the Password field blank when
signing in for the first time.
It is mandatory to set a password for
the admin user, see the next page.
Signing out
Hover the mouse
over the user
name and choose
Sign out from the
drop-down list.
Accessing the web interface
The web interface provides full configuration access to your
video conference system.
You can connect from a computer and administer the system
remotely.
In this chapter you will find information how to use the web
interface for system configuration and maintenance.
We recommend that you use the latest release of one of the
major web browsers.
Open a web browser and enter the IP address of
the video system in the address bar.
How to find the IP address
Touch controller: Tap the contact
information in the upper left corner
of the Touch controller and open the
Settings menu. Then tap System
Information.
Contents
Introduction
System settings
Setting passwords
Appendices
Web interfaceWeb interface

Cisco Telepresence MX200 Specifications

General

Resolution	1080p (Full HD)
Audio	Integrated microphone array and speakers
Network	Gigabit Ethernet
Connectivity	HDMI, USB
Video Standards	H.264
Codec	Cisco