Cisco Telepresence MX200 - Choosing a Ringtone

D14850.12 MX200 and MX300 Administrator Guide TC7.3, JULY 2015. www.cisco.com — Copyright © 2011–2015 Cisco Systems, Inc. All rights reserved.
29
Cisco TelePresence MX200 and MX300 Administrator Guide
Choosing a ringtone
You can choose from a set of predefined ringtones. The
chosen ringtone can be played back from this page.
The ringtone will be played back on the video system
itself, and not through the web interface.
Changing ringtone
Choose a ringtone from the drop-down list,
and click Save to make it the active ringtone.
Playing back the ringtone
Click the play button ( ► ) to play back the ringtone.
Use the stop button ( ) to end the playback.
Navigate to: Configuration > Personalization
Set the ringtone volume
Use the slide bar to adjust the ringtone volume.
Contents
Introduction
System settings
Setting passwords
Appendices
Web interfaceWeb interface