Cisco Telepresence MX200 Administrator's Guide

D14850.12 MX200 and MX300 Administrator Guide TC7.3, JULY 2015. www.cisco.com — Copyright © 2011–2015 Cisco Systems, Inc. All rights reserved.
31
Cisco TelePresence MX200 and MX300 Administrator Guide
User administration
You can manage your video conference system’s user
accounts from this page.
The default user account
The system comes with a default administrator user account
with full access rights. The user name is admin and no
password is set.
It is mandatory to set a password for the admin user.
Read more about passwords in the ► Setting passwords
chapter.
About user roles
A user account must hold one or a combination of several
user roles.
The following three user roles, with non-overlapping rights,
exist:
• ADMIN: A user holding this role can create new users and
change most settings. The user neither can upload audit
certificates nor change the security audit settings.
• USER: A user holding this role can make calls and search
the phone book. The user can modify a few settings, e.g.
adjusting the ringtone volume and setting the time and
date format.
• AUDIT: A user holding this role can change the security
audit configurations and upload audit certificates.
An administrator user account with full access rights,
like the default admin user, must possess all the three
roles.
Default user account
The system comes with
admin as the default user
account. This user has
full access rights.
Navigate to: Configuration > User Administration
(page 1 of 4)
Contents
Introduction
System settings
Setting passwords
Appendices
Web interfaceWeb interface

Cisco Telepresence MX200 Specifications

General

Resolution	1080p (Full HD)
Audio	Integrated microphone array and speakers
Network	Gigabit Ethernet
Connectivity	HDMI, USB
Video Standards	H.264
Codec	Cisco